Teledyne 3190 Glovebox Oxygen Analyzer

Picture

Specifications

- Ranges: Two user selectable ranges can be set between 0-10 ppm and 0-9,999 ppm oxygen. Default ranges are 0-100 ppm and 0-1,000 ppm oxygen, and a 0-25 % (nominal) Air Calibration Range.

- Signal Output:

Voltage: 0–10 V dc, negative ground

Current: 4-20 mA, negative ground

- Range ID: 0-10 V dc.

- Display: Light emitting diode (LED) display.

- Alarms: One high alarm relay, adjustable; one low alarm relay, adjustable; one sensor failure relay. (All are failsafe.)

- System Operating Temp: 0-50 °C

- Accuracy: ±2 % of full scale at constant temperature ±5 % of full scale through operating temperature range (At 100 ppm and higher user defined ranges) once temperature equilibrium is reached. ±1 ppm for 10 ppm range under above conditions.

- Response Time: 90 % in less than 65 seconds at 25 °C (68 °F).

- System Power Requirement: AC (100 to 240 V ac, 47/440 Hz), or DC (10-36 V dc); user specified.

- System Enclosure: Panel Mount: 2.81" H × 6.0" W × 2.87" D (71.4 mm × 152.4 mm ×72.9 mm). Face Plate: 3.75" H × 7.0" W