Easidew Transmitter 2-Wire Dew-Point Transmitter

Picture

Features

-2-wire loop powered connection

-Dew point or ppm moisture content

-NEMA 4, IP66

-Excellent sensor protection

-Measurement range -100 to +20°C (-148 to +68°F)

-Operating temperature -40 to 60°C (-40 to +140°F)

-Fast response

Technical

Specification

-Measurement Range (dp)：-100 to +20°Cdp (-148 to +68°Fdp)

-ccuracy (dp)：±2°Cdp (±3.6°Fdp)

-Response Time：5 mins to T95 (dry to wet)

-Repeatability：0.5°Cdp (0.9°Fdp)

-Output Signal：

4-20 mA (2-wire connection, current source)
User-configurable over range

-Output：Dew point, moisture content in ppmV
-Supply Voltage：12 ~ 28 VDC

-Load Resistance：

250 Ω @ 12 V Max
500 Ω @ 24 V

-Current Consumption：20 mA Max

-Operating Temperature：-40 ~ +60℃

-Operating Humidity：0–100% RH

-Operating Pressure：45 MPa (450 barg / 6500 psig) max

-Flow Rate：

1 to 5 Nl/min (2.1 to 10.6 scfh) mounted in standard sampling block
0 to 10 m/sec (0 to 32.8 ft/sec) direct insertion

-Temperature Coefficient：Temperature compensated across operating temperature range

-Ingress Protection：

IP66 in accordance with standard BS EN 60529:1992
NEMA 4 in protection accordance with standard NEMA 250-2003

-Housing Material：Stainless steel

-Dimensions：L=132mm x 繪27mm (L=5.19" x 繪1.00")

-Mounting Thread：5/8" - 18 UNF

-Weight：150g (5.29 oz)

-Electrical Connections：See table

-Interchangeability：Fully interchangeable transmitters

-Diagnostic Conditions(Factory programmed)：

Sensor fault 23 mA

Under-range dew point 4 mA

Over-range dew point 20 mA

Option

-Intrinsically safe dew-point transmitte：Easidew TX I.S.Ffor Hazardous Area Applications）

-Easidew Online Dew Point Hygrometer