Glovebox DF-130E Cost Effective Oxygen Analyzer

Product introduction

A Cost-effective Solution For A Range of Oxygen Analysis Needs

• Every analyzer is factory calibrated and ready to use
• Revolutionary non-depleting E-Sensor requires little or no calibration over time
• No periodic sensor replacement - reliable performance day-after-day
• With STAB-ELT option, no acid scrubbing is required for trace levels

The DF-130E is configured to provide you with a reliable, dependable and accurate oxygen analyzer at a price you can afford. Just take it out of the carton and start operating. Options include - oxygen alarm, sample pump, STAB-ELT acid gas system, CE certification.

DF-130E Specifications

Range

• Ranges are available from 0-10 ppm to 0-25%

Sample Gas Compatibility

• STANDARD SENSOR: All inert and passive gases including N2, CO, H2, Ar, freons, hydrocarbons, etc.
• SENSOR WITH Stab-ElT OPTION: Neutralizes trace contaminants including acids such as CO2, H2S, NOX, SOX, etc. (Consult Delta F for concentration limits.)

Options

• Oxygen Alarm
• Stab-ElT Acid Gas System
• Sample Pump
• Classified Area Enclosures
• CE Certification

Accuracy (at constant temperature)

• Greater of ±3% of reading or 0.5% of range

Response Time

• Responds instantaneously to O2 change. Equilibrium depends on specific conditions. Typically <10 seconds to read 90% of a step change.

Sample Requirements

• Gas phase, non-condensing, 0° to 150° F.
• Flow should be 1.0 to 3.0 scfh at 0.2 to 1.0 psig pressure.Misc.
• 19.7cm W x 21.6cm H x 25.4cm D 7kg. (7.75"W x 8.5"H x 10"D 15 lbs.)
• Operate between 0° and 45° C ambient (32° and 120° F)
• 115 VAC or 220 VAC at 25 Watts