AMI 2001 series Trace Oxygen Analyzer

Model

Description

Content

MODEL 2001RS

Picture

Overview

- Display reads oxygen from 0.05ppm up to 25.0% with no range changes

- Analog output and alarms can be configured to operate over any of ten ranges from 0-10ppm to 0-25% for best resolution

- Analog output 4-20mA, isolated.

- Complete sample system built into AMI’s patented cell block.

- Very rapid response time from air to low ppm levels.

- Easily replaceable sensor, no tools required.

- T-2 sensor resistant up to 10ppm H2S.

- Simple, versatile installation.

- Operates off 117VAC with very low power consumption

- Analog output can be easily calibrated to an external device.

- 2 independent, fully adjustable alarm settings with relay contacts.

- Complete alarm logic programming: latching or non-latching, open or close on alarm, high alarm or low alarm, alarm-on delays and alarm hold-off.

- Integral data logger: Logs data for 15 days @ 1min intervals and 30 days @ 2min. intervals, etc.

- USB connectivity to a PC: Allows complete access to the internal functions and settings.

- ModBus Industry standard protocol over RS485.

- Oxygen Sensor life indication.

- Calibration history.

Feature

- 10 user selectable output ranges

- 3 1/2 digit LCD

- 2 fully adjustable oxygen concentration alarms

- Alarm hold off/Bypass

- RFI protected

- 4-20mA. isolated analog output

- Analog output calibration synchronizes the analog output with an external monitoring system

- Data logger

- Fully programmable alarm delays

- USB port for configuration and access to advanced features

- Calibration history and sensor usage logging

- Power brownout and power failure logging

- Modbus using Bidirectional RS485 for industry-standard communications

- Low minimum detection limit 0.05ppm

- Excellent repeatability

- Extended operating temperature range

- Fast upscale/downscale response times

- Patented Cellblock Technology: Allows for all components such as flow control valve, flow meter, Sample, span and seal-off solenoid valves and compression fittings to be an integral part of the cellblocks, eliminating long lengths of tubing and fittings.

- Benefits of this design include compact size, faster response times and front panel sensor access without the need for tools.

- Unaffected by changes in flow rate from 0.1 to 2.0 SCFH

- Panel mount

- Compact size

- 2 year warranty for analyzer, parts and labor

- 6 month sensor warranty, life expectancy 1-2 years

- Requires optional AMI User Interface software

Specifications

- 2001R Series Standard ranges:

- 0 – 10 ppm, 0 – 50ppm, 0 –100 ppm, 0 – 500 ppm, 0 – 1000ppm, 0 – 5000 ppm, 0 – 1%, 0 – 5%, 0 – 10%, 0 –25%

- Sensitivity: 0.5% of full scale

- Repeatability: +/- 1% of full scale at constant temperature

- Operating temperature: 41°F to 113°F.

- Maximum inlet pressure: 20psig

- Humidity: < 85%, non-condensing

- Operational conditions: Pollution degree 2, Installation category I I.

- Drift: +/- 1% of full scale in 4 weeks at constant temperature

- Expected cell life: 9 months to 2 years.

- Response times (dependent on sensor):

- 90% of full scale in less than:

- 0 – 10 ppm 25 sec

- 0 – 100 ppm 10 sec

- 0 – 1000 ppm 10 sec

- Outputs: 4-20mA isolated.

- Alarm contacts: 230/117VAC @ 5A, or 28VDC @ 5A, resistive

- Datalogger: Logs data for 15 days @ 1 minute intervals; 30 days @ 2 minute intervals, etc. Represents the output range selected: 0-10ppm, 0-50ppm, 0-100ppm, 0-500ppm, 0-1000ppm, 0-.500%, 0-1%, 0-5%, 0-10% and 25%. Overange capability up to ten times the range selected.

- Power requirements: 90-240VAC <10W.

- Absolute Maximum Power voltage 264VAC 60Hz.

- ¼” Stainless Steel compression fittings for sample, span gas and exhaust.

- Overall dimensions: 9” w x 5” h x 7” d

- Weight 10 lbs

MODEL 2001RSP

Picture

Overview

- Display reads oxygen from 0.05ppm up to 25.0% with no range changes

- Analog output and alarms can be configured to operate over any of ten ranges from 0-10ppm to 0-25% for best resolution

- Analog output 4-20mA, isolated.

- Complete sample system built into AMI’s patented cell block.

- Very rapid response time from air to low ppm levels.

- Easily replaceable sensor, no tools required.

- T-2 sensor resistant up to 10ppm H2S.

- Simple, versatile installation.

- Operates off 117VAC with very low power consumption

- Analog output can be easily calibrated to an external device.

- 2 independent, fully adjustable alarm settings with relay contacts.

- Complete alarm logic programming: latching or non-latching, open or close on alarm, high alarm or low alarm, alarm-on delays and alarm hold-off.

- Integral data logger: Logs data for 15 days @ 1min intervals and 30 days @ 2min. intervals, etc.

- USB connectivity to a PC: Allows complete access to the internal functions and settings.

- ModBus Industry standard protocol over RS485.

- Oxygen Sensor life indication.

- Calibration history.

Feature

- 10 user selectable output ranges

- 3 1/2 digit LCD

- 2 fully adjustable oxygen concentration alarms

- Alarm hold off/Bypass

- RFI protected

- 4-20mA. isolated analog output

- Analog output calibration synchronizes the analog output with an external monitoring system

- Data logger

- Fully programmable alarm delays

- USB port for configuration and access to advanced features

- Calibration history and sensor usage logging

- Power brownout and power failure logging

- Modbus using Bidirectional RS485 for industry-standard communications

- Low minimum detection limit 0.05ppm

- Excellent repeatability

- Extended operating temperature range

- Fast upscale/downscale response times

- Patented Cellblock Technology: Allows for all components such as flow control valve, flow meter, Sample, span and seal-off solenoid valves and compression fittings to be an integral part of the cellblocks, eliminating long lengths of tubing and fittings.

- Benefits of this design include compact size, faster response times and front panel sensor access without the need for tools.

- Unaffected by changes in flow rate from 0.1 to 2.0 SCFH

- Panel mount

- Compact size

- 2 year warranty for analyzer, parts and labor

- 6 month sensor warranty, life expectancy 1-2 years

- Requires optional AMI User Interface software

Specifications

- 2001R Series Standard ranges:

- 0 – 10 ppm, 0 – 50ppm, 0 –100 ppm, 0 – 500 ppm, 0 – 1000ppm, 0 – 5000 ppm, 0 – 1%, 0 – 5%, 0 – 10%, 0 –25%

- Sensitivity: 0.5% of full scale

- Repeatability: +/- 1% of full scale at constant temperature

- Operating temperature: 41°F to 113°F.

- Maximum inlet pressure: 20psig

- Humidity: < 85%, non-condensing

- Operational conditions: Pollution degree 2, Installation category I I.

- Drift: +/- 1% of full scale in 4 weeks at constant temperature

- Expected cell life: 9 months to 2 years.

- Response times (dependent on sensor):

- 90% of full scale in less than:

- 0 – 10 ppm 25 sec

- 0 – 100 ppm 10 sec

- 0 – 1000 ppm 10 sec

- Outputs: 4-20mA isolated.

- Alarm contacts: 230/117VAC @ 5A, or 28VDC @ 5A, resistive

- Datalogger: Logs data for 15 days @ 1 minute intervals; 30 days @ 2 minute intervals, etc. Represents the output range selected: 0-10ppm, 0-50ppm, 0-100ppm, 0-500ppm, 0-1000ppm, 0-.500%, 0-1%, 0-5%, 0-10% and 25%. Overange capability up to ten times the range selected.

- Power requirements: 90-240VAC <10W.

- Absolute Maximum Power voltage 264VAC 60Hz.

- ¼” Stainless Steel compression fittings for sample, span gas and exhaust.

- Overall dimensions: 9” w x 5” h x 7” d

- Weight 10 lbs

MODEL 2001RSM

Picture

Overview

- Display reads oxygen from 0.05ppm up to 25.0% with no range changes

- Analog output and alarms can be configured to operate over any of ten ranges from 0-10ppm to 0-25% for best resolution

- Analog output 4-20mA, isolated.

- Complete sample system built into AMI’s patented cell block.

- Scans through up to five sample inputs, or may be set to dwell on any of them.

- Very rapid response time from air to low ppm levels.

- Easily replaceable sensor, no tools required.

- T-2 sensor resistant up to 10ppm H2S.

- Simple, versatile installation.

- Operates off 117VAC with very low power consumption

- Analog output can be easily calibrated to an external device.

- 2 independent, fully adjustable alarm settings with relay contacts.

- Complete alarm logic programming: latching or non-latching, open or close on alarm, high alarm or low alarm, alarm-on delays and alarm hold-off.

- Integral data logger: Logs data for 15 days @ 1min intervals and 30 days @ 2min. intervals, etc.

- USB connectivity to a PC: Allows complete access to the internal functions and settings.

- ModBus Industry standard protocol over RS485.

- Oxygen Sensor life indication.

Feature

- Built-in sample channel sequencer with up to 5 input channels.

- 10 user selectable output ranges

- 3 1/2 digit LCD

- 2 fully adjustable oxygen concentration alarms

- Alarm hold off/Bypass

- RFI protected

- 4-20mA. isolated analog output

- Analog output calibration synchronizes the analog output with an external monitoring system

- Data logger

- USB port for configuration and access to advanced features

- Calibration history and sensor usage logging

- Power brownout and power failure logging

- Modbus using Bidirectional RS485 for industry-standard communications

- Low minimum detection limit 0.05ppm

- Excellent repeatability

- Extended operating temperature range

- Fast upscale/downscale response times

- Patented Cellblock Technology: Allows for all components such as flow control valve, flow meter, Sample, span and seal-off solenoid valves and compression fittings to be an integral part of the cellblocks, eliminating long lengths of tubing and fittings.

- Benefits of this design include compact size, faster response times and front panel sensor access without the need for tools.

- Unaffected by changes in flow rate from 0.1 to 2.0 SCFH

- Panel mount

- Compact size

- 2 year warranty for analyzer, parts and labor

- 6 month sensor warranty, life expectancy 1-2 years

- Requires optional AMI User Interface software

Specifications

- 2001R Series Standard ranges:

- 0 – 10 ppm, 0 – 50ppm, 0 –100 ppm, 0 – 500 ppm, 0 – 1000ppm, 0 – 5000 ppm, 0 – 1%, 0 – 5%, 0 – 10%, 0 –25%

- Sensitivity: 0.5% of full scale

- Repeatability: +/- 1% of full scale at constant temperature

- Operating temperature: 41°F to 113°F.

- Maximum inlet pressure: 20psig

- Humidity: < 85%, non-condensing

- Operational conditions: Pollution degree 2, Installation category I I.

- Drift: +/- 1% of full scale in 4 weeks at constant temperature

- Expected cell life: 9 months to 2 years.

- Response times (dependent on sensor):

- 90% of full scale in less than:

- 0 – 10 ppm 25 sec

- 0 – 100 ppm 10 sec

- 0 – 1000 ppm 10 sec

- Outputs: 4-20mA isolated.

- Alarm contacts: 230/117VAC @ 5A, or 28VDC @ 5A, resistive

- Power requirements: 90-240VAC <10W.

- Absolute Maximum Power voltage 264VAC 60Hz.

- Overall dimensions: 9” w x 5” h x 7” d

- Weight 10 lbs

MODEL 2001RSPM

Picture

Overview

- Display reads oxygen from 0.05ppm up to 25.0% with no range changes

- Analog output and alarms can be configured to operate over any of ten ranges from 0-10ppm to 0-25% for best resolution

- Analog output 4-20mA, isolated.

- Complete sample system built into AMI’s patented cell block.

- Scans through up to five sample inputs, or may be set to dwell on any of them.

- Very rapid response time from air to low ppm levels.

- Easily replaceable sensor, no tools required.

- T-2 sensor resistant up to 10ppm H2S.

- Simple, versatile installation.

- Operates off 117VAC with very low power consumption

- Analog output can be easily calibrated to an external device.

- 2 independent, fully adjustable alarm settings with relay contacts.

- Complete alarm logic programming: latching or non-latching, open or close on alarm, high alarm or low alarm, alarm-on delays and alarm hold-off.

- Integral data logger: Logs data for 15 days @ 1min intervals and 30 days @ 2min. intervals, etc.

- USB connectivity to a PC: Allows complete access to the internal functions and settings.

- ModBus Industry standard protocol over RS485.

- Oxygen Sensor life indication.

Feature

- Built-in sample channel sequencer with up to 5 input channels.

- 10 user selectable output ranges

- 3 1/2 digit LCD

- 2 fully adjustable oxygen concentration alarms

- Alarm hold off/Bypass

- RFI protected

- 4-20mA. isolated analog output

- Analog output calibration synchronizes the analog output with an external monitoring system

- Data logger

- USB port for configuration and access to advanced features

- Calibration history and sensor usage logging

- Power brownout and power failure logging

- Modbus using Bidirectional RS485 for industry-standard communications

- Low minimum detection limit 0.05ppm

- Excellent repeatability

- Extended operating temperature range

- Fast upscale/downscale response times

- Patented Cellblock Technology: Allows for all components such as flow control valve, flow meter, Sample, span and seal-off solenoid valves and compression fittings to be an integral part of the cellblocks, eliminating long lengths of tubing and fittings.

- Benefits of this design include compact size, faster response times and front panel sensor access without the need for tools.

- Unaffected by changes in flow rate from 0.1 to 2.0 SCFH

- Panel mount

- Compact size

- 2 year warranty for analyzer, parts and labor

- 6 month sensor warranty, life expectancy 1-2 years

- Requires optional AMI User Interface software

Specifications

- 2001R Series Standard ranges:

- 0 – 10 ppm, 0 – 50ppm, 0 –100 ppm, 0 – 500 ppm, 0 – 1000ppm, 0 – 5000 ppm, 0 – 1%, 0 – 5%, 0 – 10%, 0 –25%

- Sensitivity: 0.5% of full scale

- Repeatability: +/- 1% of full scale at constant temperature

- Operating temperature: 41°F to 113°F.

- Maximum inlet pressure: 20psig

- Humidity: < 85%, non-condensing

- Operational conditions: Pollution degree 2, Installation category I I.

- Drift: +/- 1% of full scale in 4 weeks at constant temperature

- Expected cell life: 9 months to 2 years.